Wilo Smart Connect Module BT, User Manual

Page: 3 / 20

General information en
User manual Wilo-Smart Connect Module BT 3
1 General information
1.1 About these instructions
These instructions form part of the product. Compliance with the instructions is essen-
tial for correct handling and use:
ƒ
Read the instructions carefully before all activities.
ƒ
Keep the instructions in an accessible place at all times.
ƒ
Observe all product specifications.
ƒ
Observe the markings on the product.
The language of the original operating instructions is German. All other languages of
these instructions are translations of the original operating instructions.
1.2 Copyright
WILO SE © 2022
The reproduction, distribution and utilization of this document as well as the commu-
nication of its contents to others without express authorization is prohibited. Offenders
will be held liable for the payment of damages. All rights reserved.
1.3 Subject to change
Wilo shall reserve the right to change the listed data without notice and shall not be li-
able for technical inaccuracies and/or omissions. The illustrations used may differ from
the original and are intended as an example representation of the device.
2 Safety
These operating instructions contain basic information which must be adhered to dur-
ing installation and operation. For this reason, these installation and operating instruc-
tions must, without fail, be read by the installer and the responsible qualified personnel/
operator before installation and commissioning.
Not only the general safety instructions listed in the main “Safety” section must be ad-
hered to, but also the special safety instructions marked with danger symbols as de-
scribed below.
2.1 Identification of safety instruc-
tions
These installation and operating instructions set out safety instructions for preventing
personal injury and damage to property, which are displayed in different ways:
ƒ
Safety instructions relating to personal injury start with a signal word and are pre-
ceded by a corresponding symbol .
ƒ
Safety instructions relating to property damage start with a signal word and are
displayed
without a symbol.
Signal words
ƒ
DANGER!
Failure to follow the instructions will result in serious injury or death!
ƒ
WARNING!
Failure to follow instructions can lead to (serious) injury!
ƒ
CAUTION!
Failure to follow instructions can lead to property damage and possible total loss.
ƒ
NOTICE!
Useful information on handling the product
Symbols
These instructions use the following symbols:
General danger symbol
Danger of electric voltage
Warning – hot surfaces
Notes
2.2 Personnel qualifications
Personnel must:
ƒ
Be instructed about locally applicable regulations governing accident prevention.
ƒ
Have read and understood the installation and operating instructions.