Installation and operating instructions SK 601N
23
English
7 Installation and electrical connection
DANGER! Risk of fatal accident!
Improper installation and electrical connection can result in
fatal injury.
• Installation and electrical connection may only be carried out
by qualified personnel and in accordance with the applicable
regulations.
• Adhere to regulations for accident prevention
7.1
Installation
Install the switchgear in a dry, vibration-free and frost-safe
location.
Protect the place of installation from direct sunlight.
To fasten the switchgear, open the upper part of the housing:
• Loosen the 4 cover fixing screws
CAUTION! Risk of damage to property!
Incorrect handling of the switchgear can result in property
damage.
Do not drill through the housing into the wall!
• The housing and electronic components might be damaged.
• Damage to the housing (cracks) can lead to leaks.
• For wall-mounted installation, fasten the switchgear to the wall
with dowels and screws. Dimensions for the drilling pattern in
acc. with Fig. 2, screw diameter 4 mm, bore diameter 6 mm.
Before mounting the switchgear, break out the required punch
stampings on the side of the electric cable inlet and outlet for
mounting the threaded cable connections.
WARNING! Risk of injury!
Improper work on the housing can cause injuries.
• When opening the housing punch stampings, wear protective
goggles, since housing parts can chip off.