6) Rear brake: At the handle bar, slightly release the locking nut with #5 Allen key. Insert
the long cable-end into the right handle bar brake lever, then adjust and tighten locking
nut. Test rear brake lever for proper tension and correct action.
7) Front brake: Repeat above procedure for front brake. Test front brake lever for proper
tension and correct action.
8) Cut access cable with wire cutter. Attach and press cable end.
9) Install reflector with nut and washer on front bracket.
10) Pump 55 psi into the wheels, and check the brakes.
Folding the Micro Sidewalker:
Bend down holding center of handlebar with your left hand.
With your right thumb push latch and forward, This will unlock the mechanism. Then fold
the Micro.
To unfold, place the folded Micro on the ground. With your left arm unfold the Micro until
the folding mechanism engages. Lock mechanism with the clamp.
Having problems? Contact your retailer ot email us at
or call 416-702-3636
HAPPY SCOOTERING
