Step
5
Fittings
Page 5
Step
- Push fit two plastic caps onto either end of the slat. Push fit the slat into the pre-drilled pilot
holes. It may help to push the slat flat and lightly tap the plastic cap with a soft hammer. Repeat
this step with the remaining slats. The assembly is now complete.
6
K x 2
L x 2
D
L
K
D
E
Fittings
M x 64
135cm bedstead
150/180cm bedstead
M x 68
N x 4
O x 1
o
- Attach the support leg (O) to the centre rail (D) using four 30mm CSK screws (N). Locate
the centre rail into the brackets. Secure using the remaining nuts and bolts. Tighten using
two 11mm spanners (Not provided).
N
