Williams OVERTURE III, Owner'S Manual

Page: 18 / 48

OWNER'S MANUAL
18
EFFECTS
The Reverb and Chorus effects may be applied to
each voice individually and will be retained even
when the power is turned off.
To apply either effect, press either button. The
button will light and the effect will be heard when
the piano is played. To turn off the effect press the
button of the desired effect again and the LED light
will go off.
Reverb and Chorus settings are set per Instrument
and will be retained even when the power is
turned off.
Reverb
To Change the Reverb Type:
1. Press the [FUNCTION] button.
2. Turn the Value Dial to select Reverb Type edit
menu, the display will show “Reverb Type”.
3. Press the Function button again to enter the
parameter edit menu. The FUNC Indicator will
blink to indicate the value is editable.
4. Turn the Value Dial to select the Reverb type.
The different reverb types are as follows:
# Type Name # Type Name
1 Med Room 5 Long Hall
2 Ambience 6 Med Hall
3 Bright Hall 7 Long Plate
4 Giant Hall
8 Perc Plate
To Change Reverb Depth:
1. Press the [FUNCTION] button.
2. Turn the Value Dial to select the Reverb depth
edit menu. The display will show “Reverb Level”.
3. Press the Function button again to enter the
parameter edit menu. The FUNC Indicator will
blink to indicate the value is editable.
4. Select the Reverb Level range. (0-127)
Chorus
Chorus effects add shimmering movement to a
voice. The setting can be subtle to extreme.
To Change Chorus Type:
1. Press the [FUNCTION] button.
2. Turn the Value Dial to select the Chorus Type edit
menu. The display will show “Chorus Type”.
3. Press the Function button again to enter the
parameter edit menu. The FUNC Indicator will
blink to indicate the value is editable.
4. Turn the Value Dial to select a Chorus Type.
(OFF and choices 1 to 8)
Chorus Type List
# Type Name
1 Stereo
2 Slow Deep
3 Slow Flange
4 LiquidFlange
5 Big Pad
6 StudioFlange
7 Chorale
To Change Chorus Depth:
1. Press the [FUNCTION] button.
2. Turn the Value Dial to select the Chorus depth
edit menu. The display will show “Chorus Level”.
3. Press the Function button again to enter the
parameter edit menu. The FUNC Indicator will
blink to indicate the value is editable.
4. Select the depth range. (0-127)
20453755 Williams Overture III Owner's Manual_V3.indd 18 20453755 Williams Overture III Owner's Manual_V3.indd 18 8/2/21 1:57 PM 8/2/21 1:57 PM