8
OWNER'S MANUAL
3. If you want to layer a variation sound, press
the second voice button twice.
To Change the Layer Volume Level
1. Press the Chorus and Reverb Buttons
together to enter Function mode.
2. Pressing D#0 activates the layer volume
menu. The volume can be changed in 88
note steps from 0-127 where C7=127 and
A-1=0.
3. Pressing a key will play C3 of the currently
selected layered sound at the volume
corresponding to the key value.
4. Release the Reverb and Chorus Buttons to
exit the Function mode.
Split Mode
Split Mode allows the keyboard to be divided
into two sections so that different voices may
be played with the left and right hands. The
volume may be independently adjusted for each
voice, the Split Point (the highest note played
with the left hand) may be adjusted and the
Split Voice may be changed as desired.
To Enter Split Mode
Press the [SPLIT] button to enter Split mode.
Press it again to disable Split mode.
The Split (left hand) voice will be Acoustic Bass
and the Split Point will be B2.
To Change the Split Volume
1. Press the Chorus and Reverb Buttons
together to enter Function mode.
2. Pressing D#2 activates the Split Volume
menu. (See Appendix on Pg 13.)
3. The volume can be changed in 88 note
steps from 0-127 where C7=127 and A-1=0.
4. Release the Chorus and Reverb Buttons to
exit Function mode.
To Change the Split (Left Hand) Voice
Press and hold the [SPLIT] button while
depressing the desired Voice Select button.
To select a variation sound, press the voice
button twice.
To Change the Split Point
1. Press and hold the Split button.
2. Press the key that you want to be the top note
of the bottom split.
3. Release the Split button.
TUNING
To change the tuning of the piano (flat
or sharp):
1. Press the Chorus and Reverb Buttons
together to enter Function mode.
2. Press the A#-1 key to activate the tuning
menu. The keyboard will now play middle
C piano 1 voice (C3) on every note across
the keyboard. Playing middle C (C3) sets
for standard tuning, playing keys above and
below tune the piano sharp or flat up to a
semitone. (See Appendix Pg 13.)
3. Release the Chorus and Reverb Buttons
to exit Function mode.
To transpose the keyboard:
1. Press the Chorus and Reverb Buttons
together to enter the Function mode.
2. Press the C#2 key
3. Play a key on the keyboard to set the
transpose in relation to middle C (C3.) If you
would like to transpose up an octave, play C4
an octave above middle C. If you would like
to transpose down a fourth, play G2. You can
transpose the keyboard up to two octaves up
or down.
4. Release the Chorus and Reverb buttons
when you are finished selecting the transpose.
18272692 Williams Legato III Keyboard Manual V2.indd 8
6/29/18 2:06 PM
