Williams Allegro III, Owner'S Manual

Page: 10 / 20

10
OWNER'S MANUAL
To Enter Split Mode
Press the [SPLIT] button. The Split (left hand)
voice will be the last Split Voice used and
the Split Point will be B2 (an octave below
middle C.)
To Change The Lower Split Volume
To adjust the lower split volume, press and hold
the Split button and press the Value + and Value
– buttons.
Change The Split (Left Hand) Voice
Press and hold the Split button while
depressing the desired Voice Select button.
Change The Main (Right Hand) Voice
Simply press another Voice Select button.
To Change the Split Point
Hold the Split button and then press a key on
the keyboard to determine the split point. This
key will be the top key of the lower split.
To Change the Split (Left Hand) Octave
When Split mode is on, changing the octave
adjusts the lower split. Press and hold the
Octave button then press the Value + or
Value – button.
To Turn Off Split Mode
Press the Split button. The Split Button LED will
switch off to show that it is disabled.
DEMO SONGS
The Allegro III comes with 10 demo songs as
well as the ability for you to play and record
your own song. When you record your own
song the recording will be retained until you
either record a new song or tif you reset the
Allegro III back to factory settings.
To Play A Demo Song
Press the Song button and then the
corresponding Voice select button. See list
below of the demo songs.
Metronome Function
Press the Metronome button to turn on the
metronome. The LED will light. You will hear
the click in headphones or speakers. Press the
Metronome button again to exit metronome
function. The LED will turn off.
To Change Metronome Time Signature
1. Press and hold the Metronome button, then
press and hold one of the 10-key buttons on
the right side of the panel. For example, for
3/4 meter hold the Metronome and 3 (Organ)
buttons for two seconds. See the chart below
for details.
Press and Hold Result
1 None
2 2/4 or 2/8
3 3/4 or 3/8
4 4/4 or 4/8
5 5/4 or 5/8
6 6/4 or 6/8
7 7/4 or 7/8
8 Quarter (x/4) or
Eighth (x/8) meter
9 9/4 or 9/8
10 None
2. For an eighth meter (6/8, 7/8, etc), press and
hold the metronome and 8 (Mod FX) buttons.
To switch back to quarter meters, press
Metronome and 8 again.
The default meter is 4/4. The following options
are available: 2/4, 3/4, 4/4 (default), 5/4, 6/4,
7/4, 9/4, 2/8, 3/8, 4/8, 5/8, 6/8, 7/8, 9/8
To Change the Metronome Volume
To adjust the volume of the metronome in
balance with the piano sound, press and
hold Metronome and press the Value + or
Value – button.