Williams ALLEGRO 2, Owner'S Manual

Page: 13 / 20

13
ALLEGRO 2 DIGITAL PIANO
WILLIAMSPIANOS.COM
Reverb
To change the reverb type:
1. Press the Function button.
2. Turn the Value Dial to select Reverb Type edit
menu, the display will show “Rev .Type”.
3. Press the Function button again to enter
parameter edit menu. The numeric parameter
will blink to indicate the number is editable.
4. Turn the Value Dial to select Reverb type (R1
to R8).
Type # Type
Name
Type # Type
Name
R1 Hall1 R5 Room3
R2 Hall2 R6 Stage1
R3 Room1 R7 Stage2
R4 Room2 R8 Plate
To Change The Reverb Depth
1. Press and hold the Reverb button, the
display will show current depth of the reverb
and then return to the current Voice after
about 5 seconds.
2. While the display is the depth of Reverb, you
can turn the Value Dial to select the depth
range (0-127.)
You can also change the Reverb depth with the
Function button:
1. Press the Function button.
2. Turn the Value Dial to select the Reverb depth
edit menu, the display will show “R .Depth”.
3. Press the Function button again to enter the
parameter edit menu. The numeric parameter
will blink to indicate the number is editable.
4. Select the depth range (0-127).
Chorus
Chorus effects add shimmering movement to a
voice. The setting can be subtle to extreme.
To Change The Chorus Type
1. Press the Function button.
2. Turn the Value Dial to select the Chorus Type
edit menu, the display will show “Chr .Type”.
3. Press the Function button again to enter the
parameter edit menu. The numeric parameter
will blink to indicate the number is editable.
4. Turn the Value Dial to select a Chorus Type
(C1 to C8).
Chorus Type List
Type # Type
Name
Type # Type
Name
C1 Chorus1 C5 Celeste1
C2 Chorus2 C6 Celeste2
C3 Chorus3 C7 Celeste3
C4 Chorus4 C8 Celeste4
To Change The Chorus Depth
1. Press and hold the Chorus button, the
display will show current depth of the chorus
and then return to display current Voice
after about 5 sec.
2. While the display show the Chorus depth,
you can turn the Value Dial to select the
depth range (0-127.)
Also you can change the Chorus depth with the
Function Mode:
Chr.Type