96 & 97 LED SERIES
INSTALLATION INSTRUCTIONS
H.E. Williams, Inc. Carthage, Missouri www.hew.com 417-358-4065
Page 1 of 2
PN 49090174
03/16/16JL
WARNING:
• This product must be installed in accordance with the applicable
installation code by a person familiar with the construction and
operation of the product and the hazards involved.
• Make sure all electrical power is turned off while installing the fixture.
• This luminaire must be adequately grounded for protection against
shock hazards and to assure proper operation.
• Disconnect power before servicing.
• LEDs are ESD (Electro Static Discharge) sensitive devices that can be
easily damaged if the proper ESD mitigating steps are not taken.
• LEDs are very sensitive to mechanical damage. Caution must be taken
to avoid damage to the LEDs.
• ESD or mechanical damage voids all warranties.
FIXTURE DETAIL
Use the illustrations below when assembling or disassembling the fixture. (96, 4’ shown)
Latch
Mounting bracket
Wireway cover
Lens
Fiberglass housing
End plug
BACKVIEW
B
A
Nominal
Length
Overall
Length (A)
Mounting
Distance (B)
2’
27-5/8”
12”- 17” OC
4’
51-7/8”
30”- 42” OC
8’
100-1/4”
48”- 80” OC
