background image

2

SPeciFicatiOnS

SaFetY and GeneraL inFOrMatiOn

Save these instructions. 

For your safety, read, understand, and follow the information provided with and on this 

device before using. The owner and/or operator shall have an understanding of the device, its operating characteristics 

and safety operating instructions before operating the equipment. The owner and/or operator shall be aware that use 

and repair of this product may require special skills and knowledge. Instructions and safety information shall be read 

to and discussed with the operator in the operator's native language, making sure that the operator comprehends 

their contents, before use of this equipment is authorized. If any doubt exists as to the safe and proper use of this 

device, remove from service immediately. 

inspect before each use.

 Do not use if abnormal conditions such as cracked welds, damaged, loose or missing 

parts are noted. Any equipment that appears damaged in any way, is found to be worn, or operates abnormally shall 

be removed from service until repaired. If the equipment has been or is suspected to have been subjected to an 

abnormal load or shock, immediately discontinue use until inspected by a factory authorized repair facility (contact 

distributor or manufacturer for list of authorized repair facilities). It is recommended that an annual inspection be 

made by an authorized repair facility. Labels and Operator's Manuals are available from the manufacturer. 

PrOdUct deScriPtiOn

Hydraulic Bottle Jacks are designed to lift, not support, rated capacity loads consisting of one end of a vehicle. 

Immediately after lifting, the load must be supported by a pair of appropriately rated jack stands. 

 

WarninG: Never use hydraulic jack as a stand alone device. After lifting, immediately support the lifted 

             load with a pair of appropriately rated jack stands.

 

!

Model

Capacity

Base Size (L x W)

Min. Height

Max. Height

Extension Screw

3T12TV

12 Ton

5-3/8" x 6"

9-5/8"

18-5/8"

3"

3S12TV

6-1/8"

10-5/8"

1-5/8"

3T20TV

20 Ton

6-3/8" x 5-7/8"

9-7/8"

18-7/8"

3"

3S20TV

6-3/4"

11-5/8"

1-3/4"

Summary of Contents for 3T12TV









Reviews: