13
A. This appliance does not have a pilot which must
Follow the gas supplier's instructions.
be lighted by means of the piezo igniter installed
- If you cannot reach your gas supplier, call the fire
on the furnace.
department.
B. BEFORE LIGHTING, smell all around the
C. Do not use this appliance if any part has been under
appliance area for gas. Be sure to smell next
water. Immediately call a qualified service technician
to the floor because some gas is heavier than
to inspect the appliance and to replace any part of the
air and will settle on the floor.
control system and any gas control which has been
under water.
WHAT TO DO IF YOU SMELL GAS:
- Do not try to light any appliance
- Do not touch any electric switch
- Do not use any phone in your building
- Immediately call your gas supplier from a neightbor's phone
FOR YOUR SAFETY READ BEFORE OPERATING
WARNING:
If you do not follow these instructions exactly, a fire or explosion
may result causing property damage, personal injury or loss of life.
TO TURN OFF GAS TO APPLIANCE
1.
2. Turn off all electric power to the appliance if service is to be performed.
3. Turn the gas tap installed on the gas supply to the CLOSED position.
Set the thermostat to the lowest setting by turning it counterclockwise completely. Do not force.
G
RED
LAMP
MIN
MAX
RESET
R
GREEN
LAMP
MANUAL/PROGRAMMED
BUTTON
THERMOSTAT
SUMMER/WINTER
BUTTON
MIN/MAX
BUTTON
Operating Instructions
Before operating the furnace, read carefully all warnings and safety information in this manual.
