7
WaveCAST EIGHT
Wi-Fi Network Required
The WaveCAST EIGHT connects to the installation location's Wi-Fi Network. It does not provide a network on its own. The Wi-Fi
network will need to be installed and established before the WaveCAST EIGHT can be used.
Router and Network Equipment Selection
The WaveCAST EIGHT does not come with its own router or networking equipment. It is intended to be set up on an already
existing Wi-Fi network; however, upgrades to your network equipment may be necessary depending on the performance desired
from the WaveCAST EIGHT. For instance, a higher-end, more powerful router will allow more users to connect to your audio
stream than using a cheaper, less powerful router.
The Wi-Fi network will need to be accessible to the users who will be listening to the audio. A public or Guest Wi-Fi network will
usually be ideal for ease of accessibility. If the user's devices cannot connect to the network due to security settings, they will not
be able to hear the audio.
The WaveCAST EIGHT system will put a demand on the network. If the network cannot handle the demand, whether because it is
being used for other networking needs or because the networking hardware is not strong enough, the WaveCAST EIGHT will be
unable to reach it's maximum audience.
When streaming to a small or medium sized audience, a basic networking configuration may suffice. When streaming music using
multiple channels (such as having several WaveCAST EIGHT units on your network), a powerful router and network configuration is
more likely to be required.
The
WaveCAST Networking Guide
is available on the Williams AV website for additional networking tips, and applies to all
Williams AV Wi-Fi assistive listening products.
Network and Power Connections
Back Panel
Power Supply Connection
Connect the power supply to the Power Supply Jack located on the rear of the WaveCAST EIGHT server.
Network Connection
The
Ethernet
port
must be used to connect the WaveCAST EIGHT to local network. A network connection is required to use any
features of the WaveCAST EIGHT.
An Ethernet connection will not allow the WI-Fi broadcast features to work; a Wi-Fi connection must be available on the network.
Once a connection has been established, an IP address will automatically be assigned to the WaveCAST EIGHT (see the front
panel section's "Main Menu" on page 14 for help finding the IP Address). Device settings can then be set via the web interface,
including changing any network settings.
NOTE: Most settings need to be set BEFORE connecting audio sources.
System Settings
Most settings are adjusted via the web interface by using a computer (see "Web Control Interface" on page 9). A handful of
settings can be adjusted via the front panel display (see "Front Panel Interface" on page 14).
