© 2011, Williams Sound, LLC MCAT 069A
FM Transmitter
NOTE: SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE!
Dimensions:
21.8 cm (8.6”) W x 21.8 cm (8.6”) D x 4.6 cm (1.8”) H
Weight:
1.32 kg (2.9 lbs)
Color:
Black with white legends
Power:
AC: 100 to 240 VAC, 50-60 Hz, 400 mA, power inlet IEC C14
DC: 12 to 13 VDC, 800 mA, 2.1 mm DC input jack
Power Switch:
Push ON - push OFF switch with red light
Temperature Range:
Operating: 0 C to 40 C (+32 F to 104 F)
Storage:
-20 C to 70 C (-4 F to +158 F)
Operating Frequencies:
Selectable: Ch 1= 863.250 MHz, Ch 2 = 863.750 MHz, Ch 3 = 864.750 MHz, 13 other frequencies
available (see manual)
RF Output:
5 to 10 dBm (full power switch)
RF Switch:
Low/ Full power switch on rear panel
LCD Display:
Backlit, Ch #, frequency, user name, audio level VU (indicated by 11 segments total)
Menu Push Buttons:
Menu, +Ch select, -Ch select, SET
Headphone Output:
Mono, 1/4” tip barrel jack, 0.35mW power into 33 ohms, level adjust on front panel
T800 Transmitter:
T800 Front Panel
Stability:
+/- .05 MHz (0 C to 40 C)
FM Deviation:
45 kHz (line input, L+R, 1 kHz, 0.5 Vrms)
Pre-Emphasis:
50 µsec
Nominal Range:
Up to122 meters (400 ft) at RF switch full power with Williams Sound R863 receiver
Frequency Response:
Line input: 25 to 10.0 kHz +- 3 dB
Microphone input: 110 to 8.5 kHz +/- 3 dB. Dynamic microphone only
Signal/Noise Ratio (1 kHz):
Line input: > 50 dB
Microphone input: > 40 dB
%THD + noise (1 kHz):
Line input: < 0.4%
Microphone input: < 0.5%
Audio Processing:
2:1 compression (line or microphone input)
* 90 DAYS ON ACCESSORIES.
