MAN 136E
Microphone Gain Adjust
If necessary, the microphone gain control located in the battery compartment on the
back of the T863 transmitter, can be increased or decreased to meet the demands
of specific listening applications. The microphone gain control in figure 3 , can be
adjusted by using a tuning wand or small screwdriver. To reduce the gain, turn the
gain control fully counterclockwise. To increase the gain, turn the gain control fully
clockwise. Close the battery door after adjustments have been made.
Figure 3: Microphone gain control
Figure 4: Belt clip installation
A245
MIC ADJUST
A293
AA
AA
–
+
+
–
Mic Adjust
Belt Clip Installation
To Install:
Position the belt clip on the rear of the T863 transmitter as shown in
figure 4. Turn the belt clip 180˚ left or right as shown below. The belt clip is now
installed and ready for use.
To Remove:
Turn the belt clip 180˚ so the open end of the clip points to the top of
the unit as shown in figure 4. Gently pull the belt clip away from the unit to remove.
