®
10321 West 70th St., Eden Prairie, MN 55344 U.S.A. 800.843.3544 | 952.943.2252 | FAX: 952.943.2174www.williamssound.com
© 2006, Williams Sound Corp. MAN 073G
Page 1: ...s a 75 Ohm shortened dipole designed for operation at 72 76 MHz It is intended for use with Williams Sound Receivers and the T4 or T35 Transmitters Coax Feedline Cable should exit antenna at right angle as shown Antenna Rod Finger tight Connection Finger tight Connection Finger tight Connection Antenna Rod Pass Through Hole For Conduit Installations Mounting Holes Antenna Bracket Dipole Antenna Se...
Page 2: ...ighten Step 5 Attach the second Antenna Rod to the connector on the bottom of the case Use fingers only to tighten COAX FEEDLINE CABLE INSTALLATION PROCEDURE The Antenna Coax Feedline is a 20 length of RG59 Coaxial Cable The feedline connects to the Antenna Connector on the assembly as shown in the figure on page 1 Step 1 Attach the Coax Feedline to the connector facing the wall Use fingers only t...
Page 3: ...ment properly Product Recycling for Customers in the European Union Please do NOT dispose of your Williams Sound equipment in the household trash Please take the equipment to a electronics recycling center OR return the product to the factory for proper disposal RECYCLING INSTRUCTIONS 8 16 06 ...
Page 4: ... 10321 West 70th St Eden Prairie MN 55344 U S A 800 843 3544 952 943 2252 FAX 952 943 2174 www williamssound com 2006 Williams Sound Corp MAN 073G ...
