Date: 02‐Apr‐15
www.williams‐sonoma.com
Page 5 of 6
Rev:
10. Push the two end rails in to close the top
11. Secure the runners with 4 thumb screws with washer (J) by turning counter clockwise from the underside of the
table top, as seen in the illustration below.
Note:
Thumb Screws will need to go through the runner and insert into the nut which is pre-assembled on the
underside of top.
Adjusting the levelers:
Due to an uneven floor, the furniture may not sit level due causing it to wobble. If the furniture wobbles, determine
D
D
J
