Annotation Pro [Plus]
AN C5 P
QUICK START GUIDE
General Installation
Connecting the Video Source and
Outputs
A video source provides the Annotation Pro Plus a
video image. The Annotation Pro Plus incorporates
any annotations, then outputs the combined
annotations and video image to a display. Examples
of video sources include DVD players, computers,
cameras, and television sets. Outputs can be to
projectors, monitors or other display devices. In the
Annotation Pro Plus, the source can be from HDMI
or USB.
HDMI Connectors
To connect HDMI video:
1.
HDMI Input into Annotation Pro Plus
: Using
HDMI video cable, connect the
Annotation Pro Plus’s
HDMI In on the back panel to HDMI out on a HDMI
video source.
2.
HDMI Output from Annotation Pro Plus
: Using
HDMI video cable, connect the
Annotation Pro Plus’s
HDMI Out to HDMI In on a HDMI video source.
USB Connectors
Connect the provided external USB 3.0 7 port HUB
to the USB 3.0 port on the back of the Annotation
Pro Plus. The system supports up to 7 USB 3.0
devices.
Connecting Physical Controllers
IMPORTANT: Be sure to power down the
Annotation Pro Plus before connecting or
disconnecting any controllers. The Annotation
Pro Plus will automatically detect installed
controllers once powered on. If you change
controllers or add a new controller, you need to
power down, install the new controller(s), then
power the device on.
Connecting a Keyboard, Tablet or other USB De-
vices
Connect the device(s) to any USB port on the 7 port
external USB 3.0 HUB.
Connecting the Phoenix-style Connector for
Power
Connect the wires from your remote power
controller (or other device) to the Annotation Pro
Plus’s Phoenix-style connector (green connector
labeled PWR SW). When the power control relay is
enabled, the Annotation Pro Plus will power on or
off, as a toggle.
Connecting a Mouse Device via USB
Connect the mouse device to a USB port on the
back of the Annotation Pro Plus.
Connecting Touch Screens and Whiteboards
The Annotation Pro Plus is compatible with many
types of touch screens. Install the HID touch screen
to the monitor as directed by your touch screen
man ufacturer.
Power On
NOTE: In order for the Annotation Pro Plus to properly sync
with the video signals, the sources should be turned
on first.
To power on the Annotation Pro Plus:
1. Plug the power cord into the back of the Annotation
Pro Plus and then into any grounded outlet.
2. Plug the power cords from any video source(s),
controller(s), and display(s) into any grounded outlet.
3. Turn on each of the connected units, and then press
the power button on the front panel of the Annotation
Pro Plus.
After a moment, the Annotation Pro Plus splash
screen will appear, followed by the initializing of the
ports, and ending with a copyright message.
