Will Burt 5061001, Operator'S Manual, Page: 54 / 68

P
OSITION
I
T
PI-150
AND
PI-75
6-4 TP-5129001-J
January 2022
6.2 Panel Mount Controller Assembly (optional)
Will-Burt offers an optional panel mount controller assembly (P/N: 4270601) for the positioner.
The panel mount controller assembly requires the communications bridge board interface (P/N:
5090411) (section 6.1). Electronic limit stops cannot be programmed using the bridge board
with contact switch arrangement. The default joystick controller (P/N: 5098901) must be used to
program the electronic limit stops.
Figure 6-2 Panel Mount Controller (P/N: 4270601)
The membrane controller operates as follows:
•
The (4) PAN/TILT arrow buttons pan the positioner left (
◄) and right (►), and tilt the
positioner up (
▲) and down (▼).
•
STOW moves the positioner into the stowed position.
•
UNSTOW moves the positioner into the unstowed position.
The following buttons are not used:
•
HIGH SPEED
•
LOW SPEED
•
MAST UP
•
MAST DOWN