Hardware Manual
Software
WILIGEAR
Page 10
WBD-111 comes preloaded with WILIBOX WILI software together with WILI-AP skin. Device can be
accessed from a web browser using the following parameters:
Device IP address:
192.168.2.66
Username:
admin
Password:
admin01
In an event of device malfunction WBD-111 firmware can be recovered via TFTP protocol. To use this
feature, follow the steps:
1. Setup TFTP server with an IP address 192.168.1.254 and put firmware file renamed to
fwupdate.bin
to TFTP server's directory
2. Make sure that WBD-111 and TFTP server are on the same network subnet
3. Power off WBD-111 board
4. Press and hold reset button while connecting power to the board
5. Observe LEDs and wait for firmware to flash
For more information refer to WILI User's Guide and WILI-AP SKIN User's Guide which can be found
at http://www.wilibox.com website.
Software
4Gon www.4Gon.co.uk [email protected] Tel: +44 (0)1245 808295 Fax: +44 (0)1245 808299
