Wilfa Trysil 6500, Operating Instructions Manual

Page: 76 / 84

12
English
13 T-ON / T-OFF
Press the T-ON button to initiate the auto-ON timer. To cancel the auto-timer program, simply press this button again.
After pressing this button,
will disappear and ”ON” will lash. 00:00 will be displayed for setting the ON time. Within 5
seconds, press the + or - button to adjust the time value. Each press of either button changes the time setting by 1 minute.
Holding down either button rapidly changes the time setting by 1 minute and then 10 minutes. Within 5 seconds after setting
the time, press the TIMER ON button to conirm.
Press the T-OFF button to initiate the auto-off timer. To cancel the auto-timer program, simply press the button again. Setting
the TIMER OFF is the same process as for TIMER ON.
14 TURBO
Press this button to activate/deactivate the Turbo function which enables the unit to reach the preset temperature in the
shortest possible time. In COOL mode, the unit will blow strong cooled air at a super high fan speed. In HEAT mode, the unit
will blow strong heated air at a super high fan speed.
15 LIGHT
Press the LIGHT button to turn on the display light and press this button again to turn off the display light. If the light is turned
on,
is displayed. If the light is turned off, will disappear.
16 X-FAN
When pressing the X-FAN button in COOL or DRY mode, the icon will display and the indoor fan will continue operation
for 10 minutes in order to dry the indoor unit even though you have turned off the unit. After powering on the unit, X-FAN OFF
is the default value. X-FAN is not available in AUTO, FAN or HEAT mode.
17 Combination of ”+” and ”-” buttons: Locking
Press the ”+” and ”-” buttons simultaneously to lock or unlock the keypad. If the remote control is locked, will display. In this
case, by pressing any button, will lash three times.
18 Combination of ”MODE ” and ”-” buttons: Switching between Centigrade and Fahrenheit.
At unit OFF, press the ”MODE” and”-” buttons simultaneously to switch between °C and °F.
19 Combination of ”TEMP” and ”CLOCK” buttons: Energy-saving Function
Press ”TEMP” and ”CLOCK” simultaneously in COOL mode to start the energy-saving function. The display on the remote
control will display ”SE”. Repeat the operation to exit the function.
20 Combination of ”TEMP” and ”CLOCK” buttons: 8°C Heating Function
Press ”TEMP” and ”CLOCK” simultaneously in HEAT mode to start the 8°C Heating Function. The display on the remote
control will display ”
” and a temperature setting of ”8°C” (or 46°F, if applicable) will be adopted. Repeat the operation to
exit the function.
21 Backlighting Function
The unit lights up for 4 seconds when powering on for the irst time, and 3 seconds when activated later.
Trysil 6500_20_02_A4.indb 12 25.07.17 11.39