Wilfa Raw Fuel PB-1200S, Operating Instructions Manual, Page: 56 / 64

8
Engelsk
P. 8
Engelsk
8
English
P.
English
Control Panel
How to Use
Check that the electrical rating shown on the rating plate corresponds with
your household electricity supply.

Stand-by Mode and Energy Saving Mode
Plug in the blender and set the blender jug on the base unit. The power
light and indicator lamp will light up in red; the blender is now in Stand-
By Mode.
If the blender is left idle for 3 minutes the blender will go into Energy
Saving Mode; the power light will remain lit with a red light, while the
indicator lamp will go out. (From Energy Saving Mode, the unit will go
into Stand-By Mode when any key is pressed)

On/OFF Button
This button is the ON/OFF key for the pre-set programs. A selected pre-
set program function will only be activated by pressing the
button.
Pressing the button again will stop the unit.
Pre-set program
Icons
Indicator lamp
Power light
Speed dial
Pulse
button
On/OFF
Button