to keep full power.
Built-in high-capacity nickel–metal hydride battery
for long use. The
toothbrush can operate for 60 minutes, which is equivalent to 2 weeks if
you brush twice a day and spend 2 minutes brushing each time.
Over-charge and over-discharge Protection
circuit is equipped to
preserve the battery life time. When fully charged the toothbrush will
automatic cut off. When running low on battery the toothbrush will
automaticly stop.
SPECIFICATIONS
Charging unit: 100-240V~ 50/60Hz 1W. Rechargeable power unit is 2.4Volts.
Maximum operation time is approximately 60 minutes/2 weeks when fully
charged. When rechargeable batteries are running low, the indicator will
blink to tell you to recharge the unit immediately. If you continue to use the
unit for some time without recharging it, the unit may stop automatically.
This is our battery protection feature to preserve the batteries life time. You
need to recharge immediately.
CHARGING THE UNIT
The charging unit can be connected to any voltage outlet - even to shaver
sockets - between 100-240 volts AC (~).The indicator will blink with light/
shade (breathing mode) alternately, when the power unit is insert to charg-
ing base which is plugged-in. It will light up WHITE when batteries are
fully charged (18 hours). The power unit may warm up somewhat during
recharging. This has no significance on the unit’s operation. Over-charging
is impossible.
PRESERVING THE RECHARGEABLE BATTERIES
To maximize the capacity and life of the rechargeable batteries, they
should be fully charged before first use and then fully discharged
through use. Then recharge to full capacity again. This discharging/
charging procedure should be done every six months. The Electric
Toothbrush also has built-in LOW BATTERY INDICATION feature. If the
battery power often runs too low this will shorten the battery life. The
indicator will blink to remind you to charge. If you don`t charge another
“Automatic Shut off system” will stop the brush. You need to fully
recharge before using again.
BEFORE USE
Before using your Jordan Clean toothbrush for the first time, charge the unit
full. After the power unit has been fully charged, attach the brush head to
the power unit. The brush head must face the same direction as the switch
Summary of Contents for Jordan CLEAN50
Page 22: ...wilfa com ...
