8
9
English
English
Set Humidity:
Humidity can be increased from 40% to 80% at every 5%.
The machine will check the surrounding humidity automatically when turned on.
Constant humidity: The machine will control the humidity automatically when set
a humidity, For example, Just like set a humidity 50%, The machine will check
around humidity to see if it has reached 50%, Less than 50%, machine keep
working, Equal to 50% or above, Machine stop working.
Then when the humidity
goes down by 4% (less than 46%) and the machine will stop working for 3
minutes, the machine will work again.
When turning on the device, the machine will start to work for 1 minute no
matter if the surrounding humidity reaches the set humidity or not.
Warm Mist:
This button is used to adjust the level of warm mist, there are 4 levels:
max, med, min and off. When the warm mist function is off, the machine only
works with cool mist.
Aroma function
Follow below steps to use aroma function:
1. Take out aroma box.
2. Use water-soluble aroma oil and drip onto the sponge.
3. Put the aroma box back into the machine, the aroma function will
be on automatically when turning on the machine.
To stop the aroma function or if machine should not be used for a while, remove
the sponge from the aroma box, clean it with mild detergents and put it back into
the machine.
Control panel and Remote Control
On/off:
Plug in the power, there is a beep sound, and the machine comes to
the standby mode. Once press this button, the machine start to work with LED
display on. Press this button again, the machine stops working and come to the
standby mode.
Timer:
Timer or no-timer function. Timer can be from 1-12 hours.
AUTO:
By pressing this button, the machine will enter an automatic control
mode. the device will choose suitable humidifying level as per environmental
humidity and maintains the humidify between 55% - 65%.
Cool
mist Volume:
Cool mist levels from 1-3.
1.
2.
3.