Wilfa Dis HU-3W, Instruction Manual, Page: 38 / 42

P. 6
Engelsk
P. 6
EngelskEnglish
Operation
Prior to use
Fig. 1 Fig. 2
„
Position the appliance horizontally at a suitable place.
„ Remove and rotate the water tank, remove the lid (fig.1) and fill
using clean water from the tap (fig.2).
„
Replace the lid for the water tank. Wipe the water tank dry before
installing on the main unit.
„
Connect the unit to a power socket. Turn the power on and the
“On” indicator will light up.
„ The capacity can be adjusted using the level control, which will
reduce the dryness in the room.
„ When the water tank in the unit is empty, the “Fill water” indica-
tor will light up.
In use
„ Do not fill hot water above 40˚C into the water tank.
„ Do not pour water into the steam outlets on the top of the water
tank.
„ When the room temperature is below 0˚C, please empty the wa-
ter tank and water bath to prevent damage to components.
„
Atomisation/steam only has the desired effect using clean water,
please do not use chemicals and cleaning products in the water
bath and water tank.