Wilfa COOL 9 CONNECTED, Instruction Manual

Page: 17 / 356

15
EN
AIR CONDITIONER · COOL 9 CONNECTED
1
ON/OFF button
Pressing this button will turn on or turn off the air conditioner.
2
+/- button
Under cooling mode, press “+” or “-” button to increase or decrease the
temperature by 1°C (°F). Set temperature range is 16°C~30°C Under drying or
fan mode, this button is invalid.
3
Mode button
Press this button and the mode will circulate according to below sequence:
Cool-> Dry-> Fan
• Cool: Under this mode, cooling mode indicator is bright. The display shows
set temperature. Temperature setting range is 16-30 degrees Celsius.
• Dry: Under this mode, drying mode indicator is bright.
• Fan: Under this mode, the air conditioner only blow fan. Fan indicator is bright.
4
Fan button
Press this button and the fan speed will circulate as “low speed-medium speed-
high speed-auto fan-low speed”
5
Timer button
• Press timer button to enter timer setting mode.
• Under this mode, press “ + “ or “ - “ button to adjust the timer.
• The timer will increase or decrease 0.5 hour by pressing “ + “ or “ - “ within
10 hours.
Exceeding 10 hours, the timer will increase or decrease 1 hour when pressing
“+” or “-“. After setting the timer, the display shows the temperature if there’s
no operation for 5s. If timer function is started up, the upper indicator will keep
the display status. Under timer mode, press timer button again to cancel timer
mode.
6
Wi-fi button
• Press “WiFi“ button to turn on WiFi function, “WiFi“ icon will be displayed on
the remote controller: Hold “WiFi“ button for 5s to turn off WiFi function and
“WiFi“ icon will disappear.
• Under off status, press “MODE” and “WiFi“ buttons simultaneously for 1s,
WiFi module will restore factory settings.