![background image](http://html.mh-extra.com/html/wile/55/55_operating-instructions-manual_981212006.webp)
EN
6
The meter will automatically do
measurement. During the measurement
you will see
run
and then the moisture
content in weight percent, for example
13.8
.
After the measurement the meter will
automatically turn off and will be ready for
a new measurement.
You can ensure that the result represents
the average quality of the entire beans
load by taking the measurements from
several different places of the load.
2.5. Scales
The complete list of scales can be found
on the side sticker of the meter. There is
an additional -
0-
scale, which can be used
together with conversion charts. In this
case you make the measurement using
-
0-
scale and find the corresponding
moisture value from the chart. Scale is
also used by Wile service department to
calibrate the meters.
3. Processing the result
3.1. Average calculation
The meter can calculate the average
value of several measurements. After you
have made a measurement, the result can
be included for the average calculation by
Summary of Contents for 55
Page 31: ......