Attach the TV Mounting Brackets to the back of the TV. The TV Mounting Bracket must be positioned as
close to the top of the TV as possible (without going above the TV), while still being able to access all 4
holes of the VESA Pattern through the TV Mounting Bracket.
Ø6 or Ø8 X 40mm Machine Screw
(Diameter varies between TVs)
TV Top
1
2
”
or
3
4
”
Spacer
(Use spacers when the
VESA Pattern is inside of a
cut-out.)
Ex. 2
Ø6 or Ø8 X 15mm Machine Screw
(Diameter varies between TVs)
Washer
(Use washers when the hole through the TV Mounting
Bracket is larger than the head of the Machine Screw)
Ex. 1
TV Top
Note: If your TV does not match the examples below, use
any combination of the 2 examples to meet the
requirements listed above.
