Wildview STC-TGLBC2, Instruction Manual

Page: 29 / 29

www.wildviewcam.com
Toll Free 888-­‐304-­‐6125
29
FCC COMPLIANCE
This equipment has been tested and found to comply with the limits for Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio or television receptions,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measure:
Ø
Reorient or relocate the receiving antenna.
Ø
Increase the separation between the equipment and the receiver.
Ø
Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
Ø
Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Product specifications are subject to change. Wildview is not responsible
for any photographic or typographical errors.
May be protected by one or more U.S. Patent numbers: 6,735,387 /
6,768,868 / 6,834,162 / 7,149,422 / 7,308,196 / 7,593, 632 / 7,710,457 /
7,873,266.
WARNING: Modification not approved by the party responsible for
compliance could void user’s authority to operate.