Referring to the photo on page 2, the part names of the All Purpose
Parabolic Microphone are labeled. These names will be used throughout
the manual to describe parts. The parabolic dish is not in the photo.
1.
Handle
-includes a hand stop and a hole for a carrying strap.
4.
Adapter Sleeves
-used for mounting different diameter microphones.
5.
1/4-20 Screw
-for mounting mini recorders that have tripod mount.
7.
Inward Facing Windscreen
-has hole on both sides.
8.
Outward Facing Windscreen
-has hole on one side.
Parts Identification:
9.
Mic Tube
2.
Backplate
-includes the hub assembly.
Thank you for purchasing the Wildtronics All Purpose Parabolic Kit.
Your new kit was designed for years of service, ease of use, superior
performance, and allows mounting almost any existing microphone
including the Wildtronics Micro Mic PIP, Micro Mic XLR, and
Amplified Omni Microphones. The All Purpose Parabolic is a modular
system that will require some assembly. This manual will describe the
many different ways this versatile microphone can be used and
assembled. You may only use one method of mounting a microphone, but
everything is included to meet your future needs. Use commonly
available cables to connect your microphone to your recorder. Read the
entire manual before installing your microphone.
3.
Foam Cable Clamps
6.
Tube Retainer O-rings
3.
Mic Shock Mount Kit
10.
Mic Clamp Thumbscrew
11.
Front Plate
-includes lip to hold a Secondary Windscreen Accessory
An optional Secondary Windscreen Kit is an available accessory. The kit
includes the frame kit, secondary windscreen, and an o-ring mic mount
kit.
4.
Secondary Windscreen Frame Spacers
2.
Secondary Windscreen Frame screws
1.
Secondary Windscreen Frame
5.
Secondary Windscreen
1