Assembly InstructIons
heritage picnic table with
attached benches
330-893-4212 • www.wildridge.com
lcc-165
© 2021
step 1
Lay table top (A) upside down on a soft surface and attach one of
the leg assemblies (B) with (4) 5/16” x 3 1/2” carriage bolts and (4)
5/16” flange nuts, two per leg. Repeat with the other leg assembly.
step 2
To support the leg assembly, place a brace (C), turning it so the end
with no holes is towards metal frame as shown, and attach with
(2) 1 1/4” screws through the hole in the frame and into the brace.
required tools:
- Mallet/Non Marring
Hammer
(Do not use Metal Headed
Hammer)
- 1/2" Wrench or
Socket
- #2 Square Drive bit
- Cordless Drill
Hardware:
- (8) 5/16" x 3 1/2"
Carriage Bolts
- (8) 5/16” Flange Nuts
- (8) 2 1/2" Screws
- (4) 1 1/4” Screws
- (4) 2” Screws
Parts:
A = (1) Table Top
B = (2) Leg Assemblies
C = (2) Braces
D = (2) Seats
D
D
A
b
b
c
b
A
b
c
