C
C
C
A
BL
BR
D
EL
ER
Page 4 of 6
P: 866-727-0544 E: [email protected] www.wildkin.com
10. Insert Front Leg (A) to the bottom of the Seat
(C).
11. Put Small Washer (w3), Spring Washer (w4) and
Small Machine Screw (s3) in sequence into the
pre-drilled holes to secure Front Leg (A) to Seat
Bottom (C).
5. Insert Lg Machine Screw (s1) through Spring
Washer (w4) and Sm. Washer (w3) into pre-drilled
hole. (As shown in drawing).
3. Insert Arm Rests (EL & ER) vertically into the
pre-drilled holes on Seat (C).
4. Align Arm Rests (EL & ER) to the pre-drilled holes
on the Chair Back (D) post.
6. Secure screw with screwdriver until tight. Repeat
process for both legs.
7. Turn assembly upside down and align Rear Leg
(BR & BL) to the bottom of the Seat (C).
8. Insert Sm. Machine Screw (s3) through Spring
Washer (w4) and Small Washer (w3) through Rear
Legs and then into pre-drilled hole on the Seat (C).
9. Insert Med. Machine Screw (s2), through Spring
Washer (w4), through Med. Washer (w2), through
Large Washer (w1) into pre-drilled holes to secure
Rear Legs (BR & BL) to the Seat (C).
Rocking Horse Assembly Instructions
Figure 2
Attach Arm Rest (EL & ER) to Chair Back (D).
Attach Rear Legs (BR & BL) to the bottom of Seat (C).
Figure 3
Attach Front Leg (A) to Seat (C).
Figure 4
w3 w4
s1
w3
w4
s3
w3
w4
s3
w3 w4
s1
