Security: TCP_UDP Filter Configuration
You can enable or disable this function per port.
If the “Function Enable” is “Enabled”, please check the following setting:
1. “Port Filtering Rule” –
“Deny”: outgoing packets to the selected port with selected
protocol is dropped and other protocols are forwarded.
“Allow”: selected protocol are forwarded and other
protocol are dropped.
2. “Secure Port” – select secure ports.
**Note 1:
a. The secure WAN port should be set at the physical port which is connected to the server.
b. Once this function is enabled, the switch checks the destination TCP/UDP port number at
the outgoing direction of the secure WAN port.
If the condition matches, this packet is dropped or forwarded.
Wildix WS08POE User Manual
24