1. Quick Overview
Rear panel
• Reset switch
• Power supply
•
Input: AC100V~240V, 50/60Hz
•
Output: DC 12V, 1.5A
• Network ports
•
2 Ethernet ports RJ-45, 10/100 base-T
•
1 WAN port
•
1 LAN port configured in Bridge
• FXO ports
•
4 analog ports RJ-11
Front panel
• 1
Power
LED indicating that the gateway is powered
• 1
Status
LED indicating that the gateway functions
• 1
Proxy
LED indicating that the gateway is registered on SIP proxy
• 1
LAN
LED indicating that the gateway is connected to the network via this port
• 1
WAN
LED indicating that the gateway is connected to the network via this port
• 4 LEDs
Line1...Line4
indicating that the activated analog ports are connected:
•
blinking LED indicates that the line is activated but not connected
•
LED is ON indicates that the line is busy in the conversation
•
LED is OFF indicates that the line is connected and free
2. Connection to power supply (old models without PoE)
Connect the gateway using the power supply and the cable provided with the gateway, as it
is shown on the picture.
Wildix W04FXO Media gateway - Quick Installation Guide
3
