W-AIR Small Business Admin Guide
W-AIR Small Business Admin Guide
Page 4 of 12
UNLIT
No power in unit
UNLIT/SOLID RED
Error condition
BLINKING GREEN
Initialization
SOLID RED
Factory reset warning or long press in BS reset button
BLINKING RED
Factory setting in progress
SOLID GREEN
Ethernet connection available (Normal operation)
BLINKING RED
Ethernet connect not available OR handset de/registration failed
SOLID RED
Critical error
ORANGE
Press reset button of base station
BLINKING ORANGE
No IP address received
Mounting instructions
It is recommended to mount base station at an angle other than vertical on both concrete/ wood/ plaster pillars
and walls for optimal radio coverage. Avoid mounting the base unit’s upside down as it significantly reduces radio
coverage.
Mount the base unit as high as possible to clear all nearby objects (e.g. office cubicles and cabinets, etc.).
Make sure that when you fix the base stations with screws, the screws do not touch the PCB on the unit. Avoid
all contacts with any high voltage lines.
Find Base station IP
On the handset press
key followed by the keys: *47* to get the handset into find bases menu. Depending
Menu
on the amount of powered on bases with active radios and the distance to the base it can take up to minutes to
find a base.
Use the cursor down/up to select the base MAC address for the base
The base IP address will be shown in the display
The feature is also used for deployment.
Repeaters connection and overview
Repeater connection and reset
