page 6
Power Save
Setting Time
1.
After 30 seconds without any buttons
being pushed, the LCD will turn off
and camera enters into Power Save
or Ready Mode.
2.
The LCD screen can be awakened by
pressing the Power button briefly.
Note: The LCD will not “wake up”
when camera is writing to memory.
POWER
RESET
1.
To change date and time, start by
pressing and release the center
navigation button to set the hour.
2.
Press the up or down navigation
button to go up or down in se-
quence.
3.
When the hour is set, repeat
steps 1 and 2 to set the minutes.
POWER
RESET
POWER
RESET
