POWER + - ENTER
POWER + - ENTER
page 6
1.
To change date and time, start by
pressing and releasing the enter
navigation button to set the hour.
2.
Press the + or - navigation button
to go up or down in sequence.
3.
When the hour is set, repeat
steps 1 and 2 to set the minutes.
Power Save
Setting Time
POWER + - ENTER
1.
After 30 seconds without any buttons
being pushed, the LCD will turn off
and camera enters into Power Save
or Ready Mode.
2.
The LCD screen can be awakened by
pressing the Power button briefly.
Note: The LCD will not “wake up”
when camera is writing to memory.
