WILCO
OFFROAD
877
‐
945
2684
www.wilcoo
ff
road.com
Email:
info@WilcoO
3
HITCHGATE TIRE CARRIER
INSTALLATION GUIDE
UHG2060/AU
Figure
1.
Grease
wedge
lock
before
inser ng
into
receiver.
2.
Tighten
the
bolt
to
75
/lbs.
Page 1: ...less then the HitchGates rating see vehicles owner s guide for maximum towing and tongue weight By installing this product you will reduce your vehicles available tongue weight by the weight of the UHG2060 and added weight for example If the weight of the UHG2060 and your tire weights 250lbs you would reduce your available tongue weight by 250lbs Refer to your vehicles owners guide and tow hitch f...
Page 2: ...lastic thrust washer on the top and the bottom of the round metal bushing Grease and then insert the 1 2 13x5 bolt with flat washers on the top and bottom through the bushing and tighten snug See figure 3 10 Pull the latch pin and test the swing of the HitchGate If it swings too easily tighten the pivot bolt as necessary If it takes too much effort to make it swing loosen the pivot bolt as necessa...
Page 3: ...77 945 2684 www wilcooffroad com Email info WilcoOffroad com 3 HITCHGATE TIRE CARRIER INSTALLATION GUIDE UHG2060 AU Figure 1 Grease wedge lock before inser ng into receiver Figure 2 Tighten the wedge lock bolt to 75 lbs ...
Page 4: ...IRE CARRIER INSTALLATION GUIDE UHG2060 AU Insert Latch Pin 1 2 Bolt 1 2 Flat washer Delrin Washers 1 2 Flat washer 1 2 Ny Loc nut Pin and Cable Spare Tire Moun ng Plate Figure 3 Moun ng HitchGate Swing Arm to Receiver Arm 12M Bracket A ach cable to back of Gate Figure 4 Moun ng HitchGate ...
