IN-GROUND STEP ASSEMBLY
Section 2
Step 6
–
Curved Side Panel Assembly with Step
6.8
Use the step socket spline (#77143) as a drill
template on the side flange of the step. ensure the socket
side of the extrusion is towards the interior of the pool as
illustrated
and
drill
six 13/32”
holes.
Repeat for opposite side.
NOTE
–
The front face of the step and step socket
spline must be parallel to each other before drilling.
This will ensure the step is correctly positioned once
installed into the pool.
6.8
31
Summary of Contents for Optimum Pool 95-0771
Page 1: ......
