4-3
No Diving or Jumping. Observe all Safety Rules
GENERAL INSTRUCTIONS - ROUND POOLS
ASSEMBLING THE POOL FRAME
Section
4
B. INSTALLATION OF THE STABILIZERS AND TOP PLATES
1. Install stabilizers and top plates
NOTE: Depending on your pool model you may have
steel or resin top plates.
a. Install the stabilizer on the wall while ensuring to
leave a gap between each end. Insert the stabilizer
into either side of the top plate.
Steel:
Image 7
Resin:
Image 9
b. Position stabilizers and top plates just assembled
on top of wall by slightly tapping them with a
mallet. Make sure the recessed portion of the top
plates lie to the inside of the uprights.
c. Ensure that the upright is level.
d. Attach the upright to the top plate using screws.
Steel:
Image 8
Resin:
Image 10
Repeat until you have installed all the stabilizers
and top plates.
Important Note:
Ensure to leave a gap between the two stabilizers.
7
8
9
10