Wilan LIBRA 5800 AP, User Manual

Page: 30 / 156

Configuration
30 Libra 5800 Series User Guide
How to use the main menus
➧
To access the main menu via telnet
1. Ensure that the unit has an Internet IP address configured, the Ethernet connection is
operational, and wire and remote access are enabled (see Setting Ethernet and wireless access
to the TCP/IP Stack , page 50 ).
2. Ensure that the VT100 Arrows feature in your telnet session is enabled. See Setting VT100
Arrows , page 30 .
3. From a VT100 terminal emulation program, type
telnet <IP address>
, where
<IP address>
is the address of the unit that you want to configure.
4. Press
Enter
. The login screen appears.
5. Type the password (
supervisor
). The Main System Menu appears.
For more information about passwords, see Setting Menu Passwords , page 53 .
Setting VT100 Arrows
➧
To set the VT100 arrows in Microsoft telnet
1. Start a Microsoft telnet session.
2. Select Terminal, Preferences from the menu bar. The Terminal Preferences dialog box appears.
• To select an item from any of the menus, press the keyboard arrow
keys to move the cursor
–>
next to the item. Press the
Enter
key to open the data entry field. This will make the field
highlight in black.
• To scroll through items in the data entry field, press .
Press to select an item from the field.
• To exit from a menu without making changes, press the
Esc
key.
Enter
Enter
Esc