12
WIKA operating instructions, models PEW-1000 and PEW-1200
14471927.01 09/2022 EN/DE
EN
3.7 Approved battery
To ensure proper operation and the best possible performance, use only the batteries listed below:
Sensor type
Designation
Model PEW-1000
(LoRaWAN
®
)
Lithium thionyl chloride battery (model Tadiran SL860/S) and hybrid layer capacitor (model Tadiran
HLC1020L) as an assembly with connection cable assembled
(Order number: 14392747)
Model PEW-1200
(Bluetooth
®
)
Standard
Lithium thionyl chloride battery (model Tadiran SL861/S and hybrid layer capacitor (model Tadiran
HLC1020L) as an assembly with connection cable assembled
(Order number: 14395532)
Option
Lithium thionyl chloride battery (model Tadiran SL860/S and hybrid layer capacitor (model Tadiran
HLC1020L) as an assembly with connection cable assembled
(Order number: 14392747)
Attention: The optional battery may only be used with the appropriate sensor type see dimensions in
chapter 8 “Specifications”.
CAUTION!
Physical injuries and damage to property and the environment
Lithium thionyl chloride batteries are not rechargeable. Improper handling can lead to leakage or escape of
vapourised electrolyte vapours and cause a fire or explosion.
▶
Do not open the battery.
▶
Do not damage the battery cells.
▶
The positive and negative connections must not be short-circuited with conductors.
▶
Do not reverse the polarity.
▶
Do not expose the battery to excessive mechanical loads.
▶
Do not expose the battery to water or condensation.
▶
Do not heat, solder or expose the battery to fire.
▶
Do not use any rechargeable batteries!
▶
Do not continue to use batteries that have been dropped on the ground.
3. Safety