WIKA intelliTHERM TGT70, Operating Instructions Manual

Page: 8 / 60

8 WIKA operating instructions model TGT70
EN
14047194.03 03/2022 EN/DE/FR/ES
3. Specifications
Specifications intelliTHERM ® model TGT70
Measuring principle Bourdon tube system
Nominal size in mm 63, 100
Filling medium Xylol, silicone oil or syltherm
Connection location Lower mount (LM) (radial)
Version B: back mount (axial)
Instrument version
H Instrument with capillary and rear surface mounting flange
M Instrument with capillary and surface mounting bracket
B Instrument with capillary, triangular bezel and mounting clamp
V Instrument with capillary and panel mounting flange
R Direct connection without capillary
Indication accuracy Class 2, EN 13190
Capillary Length in accordance with customer specifications (max. 10 m)
Ø 2 mm, stainless steel 1.4571, bending radius no less than 6 mm
Capillary entry lower mount
Capillary mounting Take care that the mounting is free from vibration
Case and bayonet ring Stainless steel
Connection plain, stainless steel 1.4571
Stem Ø 8 mm, stainless steel 1.4571
Active sensor length Depends on Ød and scale range
Dial Plastic sticker, white with logo
Aluminium, white, black lettering
Pointer Aluminium, black
Window Laminated safety glass
Ingress protection IP65 per EN/IEC 60529
Electronics
Output signal
Voltage output With U
s
= DC 5 V, ratiometric: 0.5 … 4.5 V
With U
s
= DC 12 … 32 V, non ratiometric: 0.5 … 4.5 V
Current output 4 … 20 mA, 2-wire
Power supply (U
s
) DC 5 V / DC 12 … 32 V
Electromagnetic compatibility (EMC) EN 61326 emission (group 1, class B) and
interference immunity (industrial application)
3. Specifications