4
WIKA operating instructions, models F4801, F4802, F4818
ADPR1X914110.01 08/2020 EN/DE
EN
1. General information
1. General information
■
The single point load cells described in the operating instructions have been
designed and manufactured using state-of-the-art technology. All components
are subject to stringent quality and environmental criteria during production. Our
management systems are certified to ISO 9001.
■
These operating instructions contain important information on handling the
instrument. Working safely requires that all safety instructions and work instructions
are observed.
■
Observe the relevant local accident prevention regulations and general safety
regulations for the instrument’s range of use.
■
The operating instructions are part of the product and must be kept in the immediate
vicinity of the instrument and readily accessible to skilled personnel at any time. Pass
the operating instructions on to the next operator or owner of the instrument.
■
Skilled personnel must have carefully read and understood the operating instructions
prior to beginning any work.
■
The general terms and conditions contained in the sales documentation shall apply.
■
Subject to technical modifications.
Further information:
- Internet address:
www.wika.de
- Relevant data sheet:
FO 53.10 (model F4801)
FO 53.13 (model F4802)
FO 53.14 (model F4818)
- Application consultant:
Tel.: +49 9372 132-0
Fax: +49 9372 132-406
[email protected]
Abbreviations, definitions
4-wire
Two connection lines for the voltage supply
One connection lead for the measuring signal
UB+
Positive power supply terminal
UB-
Negative power supply terminal
S+
Positive output terminal
S-
Negative output terminal
Shield
Case
SG
Strain gauge
