4
EN
ADPR1X914124.02 06/2021 EN/DE
WIKA operating instructions, models F2220, F2221, F2226
1. General information
1. General information
■
The tension/compression force transducers described in the operating instructions
have been designed and manufactured using state-of-the-art technology. All compo-
nents are subject to stringent quality and environmental criteria during production.
Our management systems are certified to ISO 9001.
■
These operating instructions contain important information on handling the instru-
ment. Working safely requires that all safety instructions and work instructions are
observed.
■
Observe the relevant local accident prevention regulations and general safety
regulations for the instrument's range of use.
■
The operating instructions are part of the product and must be kept in the immediate
vicinity of the instrument and readily accessible to skilled personnel at any time. Pass
the operating instructions on to the next operator or owner of the instrument.
■
Skilled personnel must have carefully read and understood the operating instructions
prior to beginning any work.
■
The general terms and conditions contained in the sales documentation shall apply.
■
Subject to technical modifications.
■
Factory calibrations / DAkkS calibrations are carried out in accordance with internati-
onal standards.
Further information:
- Internet address:
www.wika.de
- Relevant data sheet:
FO 51.16 (F2220)
FO 51.26 (F2221)
FO 51.51 (F2226)
- Application consultant:
Tel.: +49 9372 132-0
Fax: +49 9372 132-406
[email protected]
Abbreviations, definitions
2-wire
The two connection lines are used for the voltage supply.
The measuring signal also provides the supply current.
3-wire
Two connection lines are used for the voltage supply.
One connection line is used for the measuring signal.
UB+
Positive power supply terminal
UB-
Negative power supply terminal
S+
Positive output terminal
S-
Negative output terminal
Shield
Case
