51
6 Set up the sensor with the display and adjustment module
WIKA Operating Instructions - Differential pressure transmitter DPT-20
6.5.5 Info
In this menu item, you can read out the instrument name and the
instrument serial number:
In this menu item, the identification number of the instrument in a
Foundation Fieldbus system is shown.
In this menu item, the hardware and software version of the sensor is
displayed.
In this menu item, the date of factory calibration of the sensor as well
as the date of the last change of sensor parameters are displayed via
the display and adjustment module or via the PC.
In this menu item, the features of the sensor such as approval, pro
-
cess fitting, seal, measuring range, electronics, housing and others
are displayed.
6.6 Saving the parameterisation data
We recommended writing down the adjustment data, e.g. in this op
-
erating instructions manual, and archiving them afterwards. They are
thus available for multiple use or service purposes.
Device name
Device ID
Instrument version
Factory calibration date
Sensor characteristics
On paper
