22
WIKA operating instructions, model CPH6600
14005103.03 11/2012 GB/D
GB
6. Commissioning, operation
6.4.3 Saving and recalling settings
The calibrator automatically saves the current setting for recall on power-up. In addition,
five settings can be accessed through the "SETUPS" menu. Select the "SETUPS"
option from the sub-menu.
"SAVE" to save the setting, "RECALL" to recall the setting or "DONE" to return home.
If "SAVE" or "RECALL" is selected, use the arrow keys to select the setting location.
Then use the "SAVE" option to store the current setting into the selected location or the
"RECALL" option to recall the setting stored in the selected location. The display menu
will automatically return home.
6.4.4 Setting auto shut-off parameters
The calibrator will switch itself off after a specified time; this function can also be
deactivated. Use the "AUTO OFF" option to set the auto shut-off parameters.
Use the F2 and F3 keys to select the time after which the calibrator will turn itself off, or
disable the auto shut-off by scrolling down to "0".