WIKA CPG2300 Series, Operating Instructions Manual

Page: 21 / 44

Operating Instructions CPG2300 Series 21
Portable Digital Pressure Gauge
CPG2300 Series
6.3.3 Password Entry Screen
If the calibration function is selected from the sensor setup screen, the password entry
screen will be displayed:
The four digit password can be entered by moving the
cursor with the left and right arrow keys under the digit
to be changed and then pressing the up or down arrow
keys to scroll through the numbers 0 to 9. When the
password is entered, press the
♦
(enter) key. The active
channel’s calibration screen will be displayed.
6.3.4 Sensor Calibration Screen
The sensor calibration screen allows the zero and span of the active sensor to be ad-
justed, the calibration to be reset to the factory defaults, and the calibration password
to be changed.
A Calibration
Cal Zero Cal Span
Change PW Reset Cal
The items in the calibration menu perform the following functions when selected:
Cal Zero: Displays the measured pressure for the active sensor.
Adjust the digits to the true pressure applied to the
active sensor and press the
♦
(enter) key to store the
value. For more details, see the Calibration section.
Cal Span: Displays the measured pressure for the active sensor.
Adjust the digits to the true pressure applied to the
active sensor and press the
♦
(enter) key to store the
value. For more details, see the Calibration section.
Sensor A Calibration
Password Entry
Enter to Continue
MA Calibration
Cal Zero Cal Span
Change PW Reset Cal
MA Calibration
Cal Zero Cal Span
Change PW Reset Cal