WIKA operating instructions attachable indicator model A-IAI-1
12
EN
14016825.04 07/2021 EN/DE
4. Transport, packaging and storage
4. Transport, packaging and storage
4.1 Transport
Check the attachable indicator for any damage that may have been caused
during transportation. Obvious damage must be reported immediately.
4.2 Packaging and storage
Do not remove packaging until just before mounting.
Keep the packaging as it will provide optimum protection during transport
(e.g. change in installation site, sending for repair).
Permissible conditions at the place of storage:
■
Storage temperature: -20 ... +50 °C
■
Humidity: 0 ... 80 % r. h. (no condensation)
Avoid exposure to the following factors:
■
Direct sunlight or proximity to hot objects
■
Mechanical vibration, mechanical shock (putting it down hard)
■
Soot, vapour, dust and corrosive gases
■
Hazardous environments, flammable atmospheres
WARNING!
Physical injuries and damage to property and the
environment
Improper storage may lead to physical injuries and damage to
property and the environment. Residual media in the dismount-
ed instrument can result in a risk to persons, the environment
and equipment.
▶
Before storing the instrument (following operation), remove
any residual media.
Store the attachable indicator in its original packaging in a location that fulfils
the conditions listed above. If the original packaging is not available, pack
and store the instrument as described below:
1. Wrap the instrument in an antistatic plastic film.
2. Place the instrument, along with shock-absorbent material, in the packaging.
3. If stored for a prolonged period of time (more than 30 days), place a bag
containing a desiccant inside the packaging.
