Wijas PERFECT 350 ELECTRONIC, Assembly And Operation Manual

Page: 3 / 9

– Water flow should be so regulated that water should not to be too hot (especially for children);
– The appliance should not be installed in aggressive environment or danger of explosion;
– Heater should never be exploited with voltage below 200V measured under load;
– Only original spare parts can be used for repair;
– Heater can be connected to tap assembly delivered by the heater’s manufacturer;
– All service and maintenance works can be completed only with power switched off;
– Avoid electronic system to be splashed with water;
– Water tap drain tube sprinkler (strainer) should be cleaned regularly.
3. Heater assembly
Wiring system
b) power net system TN-S
F2 – over-current bipolar switch
L – live lead
N – neutral lead
PE – protective lead
Minimum cross-section of wires:
PERFECT 350 ELECTRONIC – 1.5 mm
2
PERFECT 400, 450, 500 ELECTRONIC – 2.5 mm
2
Fuse rating:
PERFECT 350 ELECTRONIC – 20A
PERFECT 400, 450, 500 ELECTRONIC – 25A
3
This device may be used by children over three years old and people with limited physical,
sensory or mental abilities, or with no experience and knowledge if they are supervised or were
provided with instructions regarding the use of the device in a safe way and understand possible
dangers.
-