LOVAIR CLIMA
6
4.
I
NSTRUCTIONS FOR USE
1.
Place LOVAIR CLIMA on a solid and level surface, following the directions given
in section 3.
2.
If there is an air conditioner, a fan coil or a fan, activate the ventilation system at
the maximum power.
3.
Close all windows and possible air inlets with the outside.
4.
Connect the unit to the power supply.
5.
Select, on the control panel, the functioning time suitable to the room/place you
want to treat (please see table in section 5).
W
W
A
A
R
R
N
N
I
I
N
N
G
G
The operator must leave the room/place as soon as the ozone generator has been
activated.
W
W
A
A
R
R
N
N
I
I
N
N
G
G
Nobody (persons or animals) must stay in the room/place during the treatment.
6.
Hang the special cardboard label with hook indicating “works in progress” on
the door and close the room/place.
7.
The unit will stop automatically when the selected time is over.
8.
As soon as the treatment is completed, ventilate the room/place opening doors
and windows for at least 15 minutes.
W
W
A
A
R
R
N
N
I
I
N
N
G
G
Ventilate the room/place at least 15 minutes before staying in it again.
5.
T
ABLE OF FUNCTIONING TIMES
The below table shows the suggested times of use for the sanitization of rooms/places:
Time in minutes
Surfaces up to
5’ 15
m³
15’ 45
m³
30’ 90
m³
45’ 135
m³
60’ 180
m³
60’ x 2 **
180-360 m³
** It is necessary to use two LOVAIR units, to place at both ends of the room/place to treat.
